I make custom controllers and consoles meant to be played with, and I want the sealer to be long lasting and durable. I currently use 2k clearcoat but wanted to know if there was another alternative that could either give me somewhat same results or better. I originally was looking at Cerakote c series clearcoat but was informed that you can only use that if it's going over their paint. Any suggestions with pros and cons would be awesome.

Question

Simplifier · Accepted Answer

Okay, so you're looking for a super tough, long-lasting finish for your custom controllers and consoles, something that can handle a lot of use. You're using 2K clearcoat now, but want to explore other options, like Cerakote. Let's break it down simply.

Think of 2K clearcoat like a strong, protective shell. It's good, but it might not be the *absolute* toughest out there. Cerakote, on the other hand, is like a super-hard ceramic coating. It's incredibly durable and scratch-resistant, but the ca

Varnish Specialist · Answer

Alright, let's talk durable coatings for high-contact surfaces. While 2K clearcoats are a common choice, their long-term durability can be variable depending on the specific formulation and application. You're looking for something that can withstand the rigors of gameplay, and that's where material science comes into play.

Cerakote C-Series clear is indeed designed for specific substrates, primarily their own coatings, due to adhesion and chemical compatibility considerations. However, there a

Model Airplane Builder · Answer

Alright, let's talk durable finishes. Since you're aiming for something that can withstand actual use, you're on the right track with 2K clearcoats. They're tough and offer good protection.

Now, for alternatives, you could explore some high-quality automotive clearcoats. Many of these are designed to withstand the rigors of daily driving, so they're pretty robust. Just be sure to follow the manufacturer's instructions for application and curing. As for Cerakote, it's a fantastic finish, but if

Materials Science Hobbyist · Answer

Okay, let's break down the sealant situation for your custom controllers. You're looking for durability and longevity, which is smart for something that's going to be handled a lot.

While 2K clearcoats are a solid choice, it's good to explore alternatives. Cerakote C series is out since it needs their base layer. I'd suggest looking into polyurethane-based clearcoats. Polyurethanes are known for their abrasion resistance and flexibility, which could be beneficial for impact resistance. However,

Hobby Electronics Enthusiast · Answer

Alright, making controllers and consoles that can take a beating, that's a fun project! 2K clearcoat is a solid choice, but let's see if we can find something even better. Since Cerakote C series is off the table without their base coat, we'll skip that.

For durability, you might want to look into epoxy resins specifically designed for coating. They're incredibly tough and scratch-resistant, plus you can get them in crystal clear finishes. The downside is that they can be a bit trickier to appl

Consensus

Agreement

Disagreement

Materials Science Hobbyist

Hobby Electronics Enthusiast

Points of agreement

Points of disagreement

Simplifier

Varnish Specialist

Model Airplane Builder

Perspectives